Combining SunTech Medical’s trusted BP technology with pulse oximetry and temperature monitoring, the SunTech Vet30 Veterinary Monitor gives veterinarians an accurate, portable, and easy to use monitor to perform procedural and continuous non-invasive monitoring on dogs and cats before, during, and after procedures.
Designed for use in emergency assessment, dental procedures, pre-op, and recovery scenarios, the Vet30 quickly and easily provides reliable vital signs measurements. With the Vet30, intervals can be set to automatically monitor and measure systolic and diastolic pressures, heart rate, oxygen saturation and temperature. The Vet30 is light, portable, and small enough to carry between rooms.
Three in One: Trusted SunTech veterinary BP technology now with pulse oximetry and temperature.
Simple to use: Intuitive, color, touch screen interface.
Accurate: BP algorithm was specifically developed for companion animals by experts at a leading vet school.
Continuous Monitoring: Monitoring during procedures is simple with user-defined intervals for BP measurement.
Portable: Battery-operated device easily moved to different monitoring locations.
Rechargeable: Battery recharged when device is plugged into AC power, reducing disposable battery waste.
Memory: Up to 960 data points are retained, even when device is powered off. User can select specific measurement from device memory and perform automated BP averaging.
Data Transfer: Data can be transferred to a data trending and reporting software application for a PC using Bluetooth. Use the PC application to export reports in either PDF or CSV format.
1 x Vet30 System Monitor
1 x Protective Armour in Flamingo Pink, Peacock Blue, or Tree Frog Green
6 x Veterinary Blood Pressure Cuffs, Sizes 1-6
1 x Patient Hose, 6 ft (1.8 m)
1 x AccuVetTM Temperature Probe
1 x SpO2 Y Sensor with clips
1 x AC Adapter The User Guide is also included with each kit.
| Systolic: | 40 to 265 mmHg |
| Diastolic: | 20 to 200 mmHg |
| Mean Arterial Pressure: | 27 to 222 mmHg |
| Heart Rate: | 25 to 300 BPM |
| Device Weight: | 2.65 lbs (with battery) 1202 grams (with battery) |
| Dimensions: | 6.25” x 5” x 5.25” 15.9 cm x 12.7 cm x 13.3 cm |
| Warranty: | 2 years on monitor |
| Temp. Range: | 26°C to 46°C |
| Temp. Accuracy: | ±0.1°C plus the temperature sensor tolerance |
| Temp. Sensor: | YSI 400 compatible |
| SpO2 Range: | 0-99% Functional SpO2 |
| SpO2 Accuracy: | ±2 at 70 - 99%, less than 70% is unspecified |
| Pulse Rate Range: | 18-400 BPM |
| Pulse Rate Accuracy: | ±2% or 2 BPM, whichever is greater |
| SpO2 Range: | 0-100% |
| SpO2 Accuracy: | ±2% when no motion ±3% at low perfusion |
| Pulse Rate Range: | 0-239 BPM |
| Pulse Rate Accuracy: | ±3 BPM when no motion |
1 year on AccuVet accessories
6 months on Masimo accessories
90 days on cuffs/hoses
You can store up to 960 measurements. The monitor has a revolving memory. When you take your 961st measurement, it will be listed as measurement #1.
Select the Memory button and touch the Delete button. Before the memory is cleared, you will be asked to confirm or cancel the deletion. When you clear the Memory, you delete all measurements for all parameters.
Use cuff size as the determination factor. If a #3 cuff or smaller is the best fit, choose small animal mode. If #4 or larger, choose large animal mode.
Wrap the cuff around the patient’s limb and make sure the index line falls within the range marker. If two different cuff sizes fit the patient, choose the larger size.
During continuous monitoring of SpO2 and temperature, with an Interval BP set for every 5 minutes, a fully charged battery should last at least 4 hours before requiring recharging. If only taking manual BP measurements, a fully charged battery should last for at least 150 BP measurements before requiring recharging. Fully charging the battery should take under 6 hours. Battery life is very dependent on the touch screen display ON time. To maximize life, SunTech suggests setting the Auto OFF timer to 1 minute.
Yes. The Vet30 can be used on anesthetized animals as well as awake animals.
Attach the cuff as tight as possible. Extra attention will be needed on species with dense or thick fur. If the cuff will not stay attached, check the hook & loop for fur and remove if possible.
Yes. The device is provided with a mains power supply that recharges the internal battery when connected. When the monitor is not connected to the power supply, the battery will allow the unit to be portable for use.
There are none. Any cat or dog that has a limb that fits within the cuff ranges is acceptable.